machulda Posted January 21, 2016 Share Posted January 21, 2016 Shnáním šroubovací tažné oko na P 406. Nevím jestli je shodné s jinými modely. Závit M12x1,25mm, délka závitu 25mm. Link to comment Share on other sites More sharing options...
radim.1008 Posted January 21, 2016 Share Posted January 21, 2016 M12x1,25mm Chtěl bych vidět na 12ce šroubu stoupání 25. To jen tak pro detail. Link to comment Share on other sites More sharing options...
machulda Posted January 22, 2016 Author Share Posted January 22, 2016 Špatně jsem se vyjádřil. 25mm byla myšlena délka závitu. Upraveno Link to comment Share on other sites More sharing options...
Péťa Posted January 22, 2016 Share Posted January 22, 2016 Pamatuji si, že před cca 10 lety tady byl návod, jak si ho vyrobit (co použít, aby odpovídal závit). Zkus hledat Pokud to teda zrovna nebyl návod od jednoho mazače příspěvků z Jižních čech Link to comment Share on other sites More sharing options...
ozzy56 Posted January 22, 2016 Share Posted January 22, 2016 tažné oko se dá vyrobit pomocí jednoho kolového šroubu z Pežotu (Citroenu)--ten závit je stejný--a zbytek vytvořit z kulatiny a svařit Link to comment Share on other sites More sharing options...
Péťa Posted January 22, 2016 Share Posted January 22, 2016 Link to comment Share on other sites More sharing options...
oddie Posted January 22, 2016 Share Posted January 22, 2016 Já mám možná někde ještě celé to nářadí v polystyrenu, ale určitě ne za kilo...Jinak bych zkusil aukro nebo bazos. EDIT: hm, na aukru je, ale cena žádná velká radost http://aukro.cz/peugeot-1007-206-sw-307-406-hak-tazne-oko-i5283579362.html Link to comment Share on other sites More sharing options...
machulda Posted January 22, 2016 Author Share Posted January 22, 2016 Díky za rady o svařování, ale radši bych origo. Celou sadu taky nepotřebuju, stačí oko. Snad se zadaří u nějakého rozprodávače dílů. Link to comment Share on other sites More sharing options...
ozzy56 Posted January 22, 2016 Share Posted January 22, 2016 na vrakovišti pežot-citroen nebude problém problém asi bude tažné oko našroubovat do auta--závit bývá vyhnilý, zrezivělý atd. Link to comment Share on other sites More sharing options...
sponik Posted January 22, 2016 Share Posted January 22, 2016 myslím že jedno origo mám , kdyžtak mě napiš na email a nějak se dohodnem. sponik@seznam.cz Link to comment Share on other sites More sharing options...
Havlicek.Lukas Posted January 22, 2016 Share Posted January 22, 2016 EDIT: fotky nejsou asi to uz smazalsorry za OT Link to comment Share on other sites More sharing options...
machulda Posted January 22, 2016 Author Share Posted January 22, 2016 Sponik dík za nabídku, ale dnes sehnáno. Možno zamknout Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.